Marki Microwave Acondicionamiento de señales

Resultados: 568
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Tipo de producto
Producto
Frecuencia
Banda de frecuencias
Régimen de voltaje
Impedancia
Estilo de terminación
Paquete / Cubierta
Temperatura de trabajo mínima
Temperatura de trabajo máxima
Marki Microwave Acondicionamiento de señales MMIQ-0520L is a low LO drive, passive GaAs MMIC IQ mixer that operates down to an unrivaled +3 dBm LO drive level. This is an ultra-broadband mixer spanning 5 to 20GHz on the RF and LO ports with an IF from DC to 6 GHz.
Hoja de datos
2En existencias
Min.: 1
Mult.: 1

Signal Conditioning Mixers Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MQS-0218SM is a MMIC 2GHz - 18GHz 90 splitter/combiner. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MQS-0218SM is available as a 4 x 4 mm QFN package.
Hoja de datos
13En existencias
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The PBR-0006 is a 300 kHz to 6 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 40 dB typical isolation across the operational bandwidth.
Hoja de datos
3En existencias
Min.: 1
Mult.: 1

Signal Conditioning Power Combiners 300 kHz to 6 GHz 300 kHz to 6 GHz 50 Ohms Connector
Marki Microwave Acondicionamiento de señales The T3-07 is a high performance mixer featuring LO/RF from 1 MHz to 7 GHz and IF from 1 MHz to 4 GHz.
Hoja de datos
3En existencias
Min.: 1
Mult.: 1

Signal Conditioning Mixers 1 MHz to 7 GHz, 1 MHz to 4 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales A broadband MMIC LO buffer amplifier that efficiently provides high gain and output power over a 20-55 GHz frequency band. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm.
Hoja de datos
2En existencias
Min.: 1
Mult.: 1

Signal Conditioning 20 GHz to 55 GHz 20 GHz to 55 GHz Connector - 40 C + 85 C
Marki Microwave Acondicionamiento de señales A high power type N-connectorized bidirectional coupler capable of operation to 18 GHz. This coupler features a unique air-line construction that simultaneously enables extremely low loss and high directivity.
Hoja de datos
3En existencias
Min.: 1
Mult.: 1

Signal Conditioning Couplers 50 Ohms Connector - 40 C + 100 C
Marki Microwave Acondicionamiento de señales MM1-0222L is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations, and spurious performance across a broad bandwidth. The MM1 0222L works well as both an up and down converter through the Ku band and beyond.
Hoja de datos
6En existencias
Min.: 1
Mult.: 1

Signal Conditioning Mixers 0 Hz to 3.5 GHz, 2 GHz to 22 GHz 0 Hz to 3.5 GHz, 2 GHz to 22 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The ADA-2052 can be used as a frequency extender to enhance the frequency range of a <26 GHz synthesizer up to 52 GHz. Useful for lab testing, test and measurement, and prototype systems.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Signal Conditioning 10.5 GHz to 26 GHz 10.5 GHz to 26 GHz 5 VDC 50 Ohms Connector - 55 C + 85 C
Marki Microwave Acondicionamiento de señales The HLM-40PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of 14 dBm.
Hoja de datos
27En existencias
50Se espera el 13/10/2026
Min.: 1
Mult.: 1

Signal Conditioning 0 Hz to 40 GHz 0 Hz to 40 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales MM1-0212L is a low power GaAs MMIC double balanced mixer that operates at LO powers as a low as +1 dBm. MM1-0212L is a low frequency, low power S band mixer that works well as both an up and down converter to through X band.
Hoja de datos
3En existencias
Min.: 1
Mult.: 1

Signal Conditioning Mixers 0 Hz to 3 GHz, 2 GHz to 12 GHz 0 Hz to 3 GHz, 2 GHz to 12 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The PBR-0003 is a 300 kHz to 3 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 45 dB typical isolation across the operational bandwidth.
Hoja de datos
2En existencias
Min.: 1
Mult.: 1

Signal Conditioning Power Combiners Connector
Marki Microwave Acondicionamiento de señales The BT-0010SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 10 GHz bandwidth.
Hoja de datos
10En existencias
Min.: 1
Mult.: 1

Signal Conditioning 20 MHz to 10 GHz 20 MHz to 10 GHz 50 Ohms SMD/SMT - 65 C + 125 C
Marki Microwave Acondicionamiento de señales MPD-0226SM is a MMIC 2-way Wilkinson power divider. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MPD-0226SM is available as a 4 X 4 mm QFN package.
Hoja de datos
50En existencias
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
Hoja de datos
9En existencias
Min.: 1
Mult.: 1

Signal Conditioning Baluns 500 kHz to 3 GHz 500 kHz to 3 GHz - 55 C + 100 C
Marki Microwave Acondicionamiento de señales A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 20 GHz bandwidth.
Hoja de datos
10En existencias
10Se espera el 30/10/2026
Min.: 1
Mult.: 1

Signal Conditioning Baluns 10 MHz to 20 GHz 10 MHz to 20 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The T3-18G is a high performance mixer featuring LO/RF from 10 MHz to 18 GHz and IF from 1 MHz to 10 GHz.
Hoja de datos
2En existencias
Min.: 1
Mult.: 1

Signal Conditioning Mixers 10 MHz to 18 GHz, 1 MHz to 10 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MMD-0415HPSM is a MMIC doubler fabricated with GaAs Schottky diodes. This part operates over a 2 to 7.5 GHz input frequency range or a doubled output frequency range of 4 to 15 GHz.
Hoja de datos
25En existencias
Min.: 1
Mult.: 1

Signal Conditioning SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
Hoja de datos
1En existencias
4Se espera el 01/01/2027
Min.: 1
Mult.: 1

Signal Conditioning Power Dividers 50 Ohms Connector
Marki Microwave Acondicionamiento de señales MM1-1044H is a GaAs MMIC double balanced mixer that is designed for and operates at the K and Ka band 5G frequencies. MM1-1044H is a high linearity Ka band mixer that works well as both an up and down converter.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales MM1-1467H is a GaAs MMIC double balanced mixer with a broad IF bandwidth and low conversion loss. This mixer is ideal for applications which require broad IF bandwidths with operation at mmWave frequencies.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
Hoja de datos
5En existencias
20Se espera el 26/08/2026
Min.: 1
Mult.: 1

Signal Conditioning Baluns 500 kHz to 3 GHz 500 kHz to 3 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The C20-0R520 is a broadband 0.5-20 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.
Hoja de datos
1En existencias
1Se espera el 25/09/2026
Min.: 1
Mult.: 1

Signal Conditioning Mixers 5 MHz to 26.5 GHz 5 MHz to 26.5 GHz 50 Ohms Connector - 55 C + 85 C
Marki Microwave Acondicionamiento de señales The HLM-40ABH is a wide bandwidth GaAs Schottky diode signal limiter featuring high IP3 and medium power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of 9dBm.
Hoja de datos
2En existencias
Min.: 1
Mult.: 1

Signal Conditioning 0 Hz to 40 GHz 0 Hz to 40 GHz Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MPDR-0070CSP2 is a small footprint mmWave MMIC DC-70 GHz 2-Way resistive power divider/power splitter featuring low 1.5 dB insertion loss in our compact CSP2 chip scale package. It is much smaller than a printed PCB Power Divider/Combiner.
Hoja de datos
25En existencias
Min.: 1
Mult.: 1

Signal Conditioning Power Dividers / Power Splitters SMD/SMT - 55 C + 100 C