Todos los resultados (1,865)

Filtros

Opciones de disponibilidad
Seleccionar Imagen N.° de pieza Fabricante: Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad. Cantidad RoHS
SparkFun Accesorios SparkFun IC Hook with Pigtail 60En existencias
$7.48
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Alligator Clip with Pigtail 4 Pack 3En existencias
50En pedido
$6.18
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun USB OTG Cable- Fem. A to Micro B - 5in 6En existencias
$5.14
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a 5-pin JST-ZHR cable that's terminated with breadboard breadboard compatible male pins. It's the same cable that comes with our SPS30 Particulate Matter Sensor and is a great spare if you need one or if you happen to need to connect to a dev
Mouser actualmente no vende este producto en su región.
SparkFun Accesorios SparkFun USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables have minor yet genius modifications that allow them to be plugged into their ports 80En existencias
$7.40
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Give your custom enclosure a professional finish. This panel-mount extension cable bridges the gap between your project's internal USB Micro-B port and an external USB-B connection keeping your connections secure and accessible. Whether you are boxi 49En existencias
$4.88
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is an inexpensive 3-foot-long HDMI to Micro HDMI cable that you can use to hook up your Raspberry Pi 4 and 5 to a suitable monitor or TV. Heck you can hook up anything you want with it! Micro HDMI is less common of a medium right now even more 24En existencias
$12.19
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing and place a biomedical sensor pad into the electrode snap. When ready stick the refer
Mouser actualmente no vende este producto en su región.
SparkFun Accesorios SparkFun Mini Pushbutton Switch 295En existencias
$0.65
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to 6En existencias
$18.85
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down selections then select by pressing the plastic piece inwards. Capable of swtiching up to 1.2 670En existencias
$2.28
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a very common 0.1uF capacitor. Used on all sorts of applications to decouple ICs from power supplies. 0.1" spaced leads make this a perfect candidate for breadboarding and perf boarding. Rated at 50V. 97En existencias
$0.416
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Mini Pushbutton Switch - SMD 1,012En existencias
$1.43
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun There are lots of trimpots out there. Some are very large some so small they require a screwdriver. Here at SparkFun we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob built right in and it's breadboard frien 229En existencias
$1.63
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Knobs are a great way to finish off your project and make it easier to adjust the level of your death ray. This knob mates to a 0.25" shaft. The knob slides onto the potentiometer and holds tightly with a strong friction fit.The main body of these kn 204En existencias
$2.98
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Tactile Button Assortment 22En existencias
$7.74
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Resistor Kit 1/4W 500 pieces 104En existencias
139En pedido
$12.94
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1VForward Current: 20mAIntensity (R/G/B): 550 / 250 / 700 mcdCommon CathodeDocuments:D 69En existencias
$2.67
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun It's the end of the world and you need to press a button. This is it. This gigantic 100mm green dome button is the perfect dramatic centerpiece for interactive exhibits escape rooms or custom arcade builds. It features a built-in LED indicator to 1En existencias
$24.83
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Heating Pad - 5x10cm 28En existencias
$6.44
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Heating Pad - 5x15cm 21En existencias
$8.94
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding 12En existencias
$3.63
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun 7-Segment Serial Display - Red 46En existencias
$23.76
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These color-changing LEDs take the work out of creating crazy flashy blinky... ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LEDs make great decorations LED " 150En existencias
$0.78
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This inline switch is great when you just want a simple on/off toggle switch that's already enclosed. Inside is a simple rocker switch with solder terminals with crimp strain relief. Attach some wires solder them in place and press-fit the enclosur 75En existencias
$2.28
Min.: 1
Mult.: 1