|
|
Antennas Achieve pinpoint accuracy for your mobile GNSS projects. The SparkPNT Telescopic Surveying Pole can help you dial in your point heights down to the millimeter without weighing you down. This lightweight carbon fiber pole weighs less than 2.1 lbs (1.0
SparkFun GPS-25795
- GPS-25795
- SparkFun
-
1:
$274.87
-
3Expected 11/23/2026
-
New At Mouser
|
Mouser Part #
474-GPS-25795
New At Mouser
|
SparkFun
|
Antennas Achieve pinpoint accuracy for your mobile GNSS projects. The SparkPNT Telescopic Surveying Pole can help you dial in your point heights down to the millimeter without weighing you down. This lightweight carbon fiber pole weighs less than 2.1 lbs (1.0
|
|
3Expected 11/23/2026
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
SparkFun Accessories Easily control high-power devices directly from your microcontroller via I2C with the SparkFun Qwiic Relay. Built around the Omron G6K-2F-Y DC3 dual-pole/dual-throw (DPDT) relay this board allows you to safely switch loads up to 1A at 30VDC or 0.3A
- COM-30416
- SparkFun
-
1:
$12.94
-
Non-Stocked Lead-Time 7 Weeks
-
New Product
|
Mouser Part #
474-COM-30416
New Product
|
SparkFun
|
SparkFun Accessories Easily control high-power devices directly from your microcontroller via I2C with the SparkFun Qwiic Relay. Built around the Omron G6K-2F-Y DC3 dual-pole/dual-throw (DPDT) relay this board allows you to safely switch loads up to 1A at 30VDC or 0.3A
|
|
Non-Stocked Lead-Time 7 Weeks
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
Memory IC Development Tools SIM Card Socket Breakout
- BOB-00573
- SparkFun
-
10:
$7.46
-
Non-Stocked Lead-Time 5 Weeks
|
Mouser Part #
474-BOB-00573
|
SparkFun
|
Memory IC Development Tools SIM Card Socket Breakout
|
|
Non-Stocked Lead-Time 5 Weeks
|
|
Min.: 10
Mult.: 1
|
|
|
|
|
RF Cable Assemblies This is a basic RP-SMA (Reverse Polarity Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8in.) long with RG174 housing. The RP-SMA connectors at each end are small enough for most consumer GPS cellular and other RF applicatio
- CAB-22037
- SparkFun
-
1:
$5.14
-
Non-Stocked Lead-Time 12 Weeks
|
Mouser Part #
474-CAB-22037
|
SparkFun
|
RF Cable Assemblies This is a basic RP-SMA (Reverse Polarity Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8in.) long with RG174 housing. The RP-SMA connectors at each end are small enough for most consumer GPS cellular and other RF applicatio
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Power Management IC Development Tools LilyPad Simple Power
- DEV-11893
- SparkFun
-
1:
$16.25
-
Non-Stocked Lead-Time 3 Weeks
|
Mouser Part #
474-DEV-11893
|
SparkFun
|
Power Management IC Development Tools LilyPad Simple Power
|
|
Non-Stocked Lead-Time 3 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Cameras & Camera Modules Raspberry Pi Camera Module V2
- DEV-14028
- SparkFun
-
Shipping Restricted
|
Mouser Part #
474-DEV-14028
|
SparkFun
|
Cameras & Camera Modules Raspberry Pi Camera Module V2
Mouser does not presently sell this product in your region.
|
|
|
|
|
|
|
|
|
Audio IC Development Tools The SparkFun Qwiic Speaker Amp includes the Texas Instruments TPA2016D2 stereo filter-free class-D audio power amplifier. What distinguishes this audio amplifier from others is that it features volume control (i.e. gain) Dynamic Range Compression (
- DEV-20690
- SparkFun
-
1:
$21.23
-
Non-Stocked Lead-Time 2 Weeks
|
Mouser Part #
474-DEV-20690
|
SparkFun
|
Audio IC Development Tools The SparkFun Qwiic Speaker Amp includes the Texas Instruments TPA2016D2 stereo filter-free class-D audio power amplifier. What distinguishes this audio amplifier from others is that it features volume control (i.e. gain) Dynamic Range Compression (
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags & Transponders This is a basic RFID tag that operates in accordance with the MIFARE Classic 1K specifications. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a co
- SEN-10127
- SparkFun
-
1:
$5.01
-
Non-Stocked Lead-Time 2 Weeks
|
Mouser Part #
474-SEN-10127
|
SparkFun
|
NFC/RFID Tags & Transponders This is a basic RFID tag that operates in accordance with the MIFARE Classic 1K specifications. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a co
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Optical Sensor Modules The Sensirion Particulate Matter Sensor SPS30 is a compact high quality optical particle sensor that uses laser scattering and Sensirion's innovative contamination resistance technology to achieve superior binning and particle measurement. This sen
- SEN-15103
- SparkFun
-
1:
$78.82
-
Non-Stocked Lead-Time 7 Weeks
|
Mouser Part #
474-SEN-15103
|
SparkFun
|
Optical Sensor Modules The Sensirion Particulate Matter Sensor SPS30 is a compact high quality optical particle sensor that uses laser scattering and Sensirion's innovative contamination resistance technology to achieve superior binning and particle measurement. This sen
|
|
Non-Stocked Lead-Time 7 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Pressure Sensor Development Tools The SparkFun Qwiic Micro Pressure Sensor features the BMP384 pressure sensor from Bosch Sensortec. The BMP384 excels at high-resolution measurements (up to 21-bit) and uses a gel-filled cavity to provide extra resistance to liquids (water and other
- SEN-19833
- SparkFun
-
1:
$22.43
-
Non-Stocked Lead-Time 2 Weeks
|
Mouser Part #
474-SEN-19833
|
SparkFun
|
Pressure Sensor Development Tools The SparkFun Qwiic Micro Pressure Sensor features the BMP384 pressure sensor from Bosch Sensortec. The BMP384 excels at high-resolution measurements (up to 21-bit) and uses a gel-filled cavity to provide extra resistance to liquids (water and other
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Soldering & Desoldering Stations The WLSK3012A Soldering Station from Weller is a versatile 5 to 30 watt soldering station that is perfect for hobbyists DIYers and students. The WLSK3012A operates at 120V and features a continuous dial to provide variable power control to the sold
- TOL-22133
- SparkFun
-
1:
$118.63
-
Non-Stocked Lead-Time 3 Weeks
|
Mouser Part #
474-TOL-22133
|
SparkFun
|
Soldering & Desoldering Stations The WLSK3012A Soldering Station from Weller is a versatile 5 to 30 watt soldering station that is perfect for hobbyists DIYers and students. The WLSK3012A operates at 120V and features a continuous dial to provide variable power control to the sold
|
|
Non-Stocked Lead-Time 3 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sub-GHz Development Tools RFM69 Breakout 915MHz
- WRL-12775
- SparkFun
-
1:
$18.53
-
Non-Stocked Lead-Time 4 Weeks
|
Mouser Part #
474-WRL-12775
|
SparkFun
|
Sub-GHz Development Tools RFM69 Breakout 915MHz
|
|
Non-Stocked Lead-Time 4 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 we now have the XBee Series 3 which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the modules over UART
- WRL-15126
- SparkFun
-
1:
$31.69
-
Non-Stocked Lead-Time 9 Weeks
|
Mouser Part #
474-WRL-15126
|
SparkFun
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 we now have the XBee Series 3 which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the modules over UART
|
|
Non-Stocked Lead-Time 9 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 we now have the XBee Series 3 which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the modules over UART
- WRL-15130
- SparkFun
-
1:
$39.00
-
Non-Stocked Lead-Time 4 Weeks
|
Mouser Part #
474-WRL-15130
|
SparkFun
|
Zigbee Modules - 802.15.4 After years of popularity with the XBee Series 1 and XBee Series 2 we now have the XBee Series 3 which brings the best of both worlds. XBee 3 not only handles 802.15.4 and ZigBee but also BLE protocols and you can now talk to the modules over UART
|
|
Non-Stocked Lead-Time 4 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Multiprotocol Modules The Digi XBee 3 global cellular module is a cutting-edge compact module engineered for rapid integration of cellular IoT capabilities. This innovative solution is equipped with cellular and BLE connectivity with end-device carrier certifications an
- WRL-22329
- SparkFun
-
1:
$121.88
-
Non-Stocked Lead-Time 2 Weeks
|
Mouser Part #
474-WRL-22329
|
SparkFun
|
Multiprotocol Modules The Digi XBee 3 global cellular module is a cutting-edge compact module engineered for rapid integration of cellular IoT capabilities. This innovative solution is equipped with cellular and BLE connectivity with end-device carrier certifications an
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Antennas This is an Extremely Efficient Wide Band Flexible LTE Antenna with a small footprint. This easy to install durable flexible polymer antenna operates on greater than 45% efficiency on LTE bands from 698 3000MHz. For use in a wide array of appli
- WRL-22527
- SparkFun
-
1:
$15.37
-
Non-Stocked Lead-Time 3 Weeks
|
Mouser Part #
474-WRL-22527
|
SparkFun
|
Antennas This is an Extremely Efficient Wide Band Flexible LTE Antenna with a small footprint. This easy to install durable flexible polymer antenna operates on greater than 45% efficiency on LTE bands from 698 3000MHz. For use in a wide array of appli
|
|
Non-Stocked Lead-Time 3 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it's hard to get power to your Ethernet devices. Wouldn't it be convenient to use the
- CAB-10759
- SparkFun
-
1:
$7.74
-
Non-Stocked Lead-Time 12 Weeks
|
Mouser Part #
474-CAB-10759
|
SparkFun
|
SparkFun Accessories Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it's hard to get power to your Ethernet devices. Wouldn't it be convenient to use the
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Bring the authentic feel of classic cabinet gaming to your next build with this short-handled Arcade Joystick. Designed specifically as a 4-way "Pacman-style" directional input this joystick actively prevents accidental diagonal movements ensuring
- COM-09182
- SparkFun
-
1:
$27.95
-
Non-Stocked Lead-Time 3 Weeks
|
Mouser Part #
474-COM-09182
|
SparkFun
|
SparkFun Accessories Bring the authentic feel of classic cabinet gaming to your next build with this short-handled Arcade Joystick. Designed specifically as a 4-way "Pacman-style" directional input this joystick actively prevents accidental diagonal movements ensuring
|
|
Non-Stocked Lead-Time 3 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories It's the end of the world and you need to press a button. This is it. This gigantic 100mm blue dome button is the perfect dramatic centerpiece for interactive exhibits escape rooms or custom arcade builds. It features a built-in LED indicator to d
- COM-11274
- SparkFun
-
1:
$24.83
-
Non-Stocked Lead-Time 12 Weeks
|
Mouser Part #
474-COM-11274
|
SparkFun
|
SparkFun Accessories It's the end of the world and you need to press a button. This is it. This gigantic 100mm blue dome button is the perfect dramatic centerpiece for interactive exhibits escape rooms or custom arcade builds. It features a built-in LED indicator to d
|
|
Non-Stocked Lead-Time 12 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 20mm and has two mounting holes on top.Dimensions: 9.5mm x 35mmDocuments:Datasheet (C2031N-1A2-B10K-GP)
- COM-11620
- SparkFun
-
1:
$1.37
-
Non-Stocked Lead-Time 2 Weeks
|
Mouser Part #
474-COM-11620
|
SparkFun
|
SparkFun Accessories A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 20mm and has two mounting holes on top.Dimensions: 9.5mm x 35mmDocuments:Datasheet (C2031N-1A2-B10K-GP)
|
|
Non-Stocked Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories There is something incredibly satisfying about a clean heavy-duty metal interface. This 16mm latching pushbutton with wires is designed to provide the professional rugged feel for your custom panels and interactive projects. Instead of a basic plas
- COM-11973
- SparkFun
-
1:
$10.37
-
Non-Stocked Lead-Time 5 Weeks
|
Mouser Part #
474-COM-11973
|
SparkFun
|
SparkFun Accessories There is something incredibly satisfying about a clean heavy-duty metal interface. This 16mm latching pushbutton with wires is designed to provide the professional rugged feel for your custom panels and interactive projects. Instead of a basic plas
|
|
Non-Stocked Lead-Time 5 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories ProtoShield Kit
- DEV-13820
- SparkFun
-
1:
$20.02
-
Non-Stocked Lead-Time 1 Week
|
Mouser Part #
474-DEV-13820
|
SparkFun
|
SparkFun Accessories ProtoShield Kit
|
|
Non-Stocked Lead-Time 1 Week
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure relative humi
- DEV-15837
- SparkFun
-
1:
$23.57
-
Non-Stocked Lead-Time 3 Weeks
|
Mouser Part #
474-DEV-15837
|
SparkFun
|
SparkFun Accessories The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure relative humi
|
|
Non-Stocked Lead-Time 3 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board you know how valuable these are! Number of pins include: 8 14 16 18 28 and 40.This is a 300mil wide 16-pin socket.
- PRT-07938
- SparkFun
-
1:
$0.78
-
Non-Stocked Lead-Time 5 Weeks
|
Mouser Part #
474-PRT-07938
|
SparkFun
|
SparkFun Accessories Dip sockets for all your prototyping needs. If you've ever had to de-solder a dip part from a circuit board you know how valuable these are! Number of pins include: 8 14 16 18 28 and 40.This is a 300mil wide 16-pin socket.
|
|
Non-Stocked Lead-Time 5 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
- PRT-10366
- SparkFun
-
1:
$2.00
-
Lead-Time 2 Weeks
|
Mouser Part #
474-PRT-10366
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
|
|
Lead-Time 2 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|