Marki Microwave Acondicionamiento de señales

Resultados: 568
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Tipo de producto
Producto
Frecuencia
Banda de frecuencias
Régimen de voltaje
Impedancia
Estilo de terminación
Paquete / Cubierta
Temperatura de trabajo mínima
Temperatura de trabajo máxima
Marki Microwave Acondicionamiento de señales The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R106CSP2, offering flexibility in system design.
Hoja de datos
25Se espera el 21/08/2026
Min.: 1
Mult.: 1

Signal Conditioning Baluns 100 MHz to 6 GHz 100 MHz to 6 GHz 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN.
Hoja de datos
25Se espera el 10/07/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The MM1-0626H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
Hoja de datos
10Se espera el 29/05/2026
Min.: 1
Mult.: 1

Signal Conditioning Mixers 0 Hz to 9 GHz, 6 GHz to 26.5 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales MMIC Doubler Output 20-50 GHz, +10 to +15 dBm, 3mm QFN
Hoja de datos
22Se espera el 31/07/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion.
Hoja de datos
1Se espera el 21/08/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales MMIQ-0218L is a low LO drive, passive GaAs MMIC IQ mixer that operates across a 9:1 bandwidth. This is an ultra-broadband mixer spanning 2 to 18GHz on the RF and LO ports with an IF from DC to 3 GHz.
Hoja de datos
3Se espera el 05/06/2026
Min.: 1
Mult.: 1

Signal Conditioning Mixers 0 Hz to 3 GHz, 2 GHz to 18 GHz 0 Hz to 3 GHz, 2 GHz to 18 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MMIQ-0416H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
Hoja de datos
1Se espera el 23/10/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The MPD4-0218CSP3 is a small footprint MMIC 2-18 GHz 4-Way power divider/power splitter featuring high 29 dB isolation and low 0.8 dB excess insertion loss in our compact CSP3 chip scale package.
Hoja de datos
25Se espera el 19/06/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The MPDW-0670CSP2 is a small footprint MMIC 6-70 GHz 2-Way power divider/power splitter featuring high 24 dB isolation and low 1 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
25Se espera el 01/06/2026
Min.: 1
Mult.: 1

Signal Conditioning Power Dividers / Power Splitters SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
Hoja de datos
16En pedido
Min.: 1
Mult.: 1
Signal Conditioning Power Dividers SMD/SMT
Marki Microwave Acondicionamiento de señales The BT-0035SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 35 GHz bandwidth.
Hoja de datos
9Se espera el 05/06/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The BTM-0026PSM-2 is a packaged miniature bias tee featuring excellent 0.4 dB insertion loss and superior 25 dB isolations over a broad 10 MHz to 26 GHz bandwidth. The BTM-0026PSM-2 works well for K-Band applications.
Hoja de datos
25Se espera el 20/07/2026
Min.: 1
Mult.: 1

Signal Conditioning 10 MHz to 26 GHz 10 MHz to 26 GHz 16 V SMD/SMT - 55 C + 100 dB
Marki Microwave Acondicionamiento de señales The C20-0R520 is a broadband 0.5-20 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.
Hoja de datos
1Se espera el 28/05/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.
Hoja de datos
1Se espera el 05/06/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales This equalizer provides 2.6 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 4 dB and a 50-ohm match maintained over the entire operating range.
Hoja de datos
1Se espera el 05/06/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales This equalizer provides 4 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 6 dB and a 50-ohm match maintained over the entire operating range.
Hoja de datos
1Se espera el 05/06/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales MM1-1467H is a GaAs MMIC double balanced mixer with a broad IF bandwidth and low conversion loss. This mixer is ideal for applications which require broad IF bandwidths with operation at mmWave frequencies.
Hoja de datos
1Se espera el 20/07/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The MPD-0108FCSP2 is a small footprint MMIC 1-8 GHz 2-Way power divider/power splitter featuring high 23 dB isolation and low 0.8 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
21Se espera el 02/07/2026
Min.: 1
Mult.: 1

Signal Conditioning Power Dividers / Power Splitters 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MPD4-0108CSP2 is a small footprint MMIC 1-8 GHz 4-Way power divider/power splitter featuring high 30 dB isolation and low 2.6 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
22Se espera el 26/06/2026
Min.: 1
Mult.: 1

Signal Conditioning Power Dividers / Power Splitters SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales A resistive 2-way power divider that features broadband operation from DC to 40 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
Hoja de datos
1Se espera el 02/10/2026
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales A broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The ABDS-10170PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. It offers 3 dB differential to single ended gain from low frequencies (limited by DC block) to 30 GHz.
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The ABSD-10168PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 3 dB single ended to differential gain (low end limited by DC block).
Hoja de datos
Plazo de entrega no en existencias 10 Semanas
Min.: 25
Mult.: 25

Signal Conditioning
Marki Microwave Acondicionamiento de señales The ADA-1030 can be used as a frequency extender to enhance the frequency range of a <15 GHz synthesizer up to 30 GHz. Useful for lab testing, test and measurement, and prototype systems.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Signal Conditioning
Marki Microwave Acondicionamiento de señales The ADM-8344 is a wideband distributed low noise amplifier capable of providing 18 dB gain and +27 dBm OIP3 from DC to 18 GHz and a low 1.4 dB typical noise figure from 4 to 7 GHz.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Signal Conditioning